SL7 DG Vault™ Range

SL7™ Innovation has designed, developed and now offers to market a certified compliant, relocatable 240/240/240 FRR, storage and containment solution that can be adapted to any market or environment.

With the vault ranges inherent portability comes many unique benefits over traditional concrete structures where, we believe, FRR integrity and compliance could be considered questionable.

Listed here are some of the benefits of our SL7™ Vault range;

SL7™ DG Vaults™ – arrive at site certified compliant as a WorkSafe (NZ) Type ‘D’ package storage unit.

SL7™ DG Vaults™ – comply with the zero separation requirements as specified for a WorkSafe (NZ) Type ‘D’ storage, both inside and outside a building and particularly where ground footprints are at a premium.

SL7™ DG Vaults™ – are certified compliant to 240/240/240 FRR against fire engineering judgement number 180237.

SL7™ DG Vaults™ – are certified compliant for use as WorkSafe (NZ) ‘Types 2 & 3’ Workrooms.

SL7™ DG Vaults™ – can be adapted to dispense hazardous substance fluids direct to equipment via approved feed lines with the addition of a fire collar ie, fibre glassing resin distribution to chopper guns.

SL7™ DG Vaults™ – are designed to maintain an internal temperature of 55 deg C for a minimum of 4 hours.

SL7™ DG Vaults™ – exceed the requirements of UL1709 including the requisite 4 hours jet pool fire test. Concrete is not UL rated and therefore raises valid questions around insurance credibility post-accident or event.

6m Vault.147
6m Vault.171

SL7 DG Vaults™ – come in a range of ‘high cube’ – 3 metre and 6 metre options. We also offer a choice of end or side opening doors in the 6 metre vault.

SL7 DG Vaults™ – all come with integral secondary containment. Our 3 metre vaults have 2,500 litre bunding and our 6 metre vaults have 5,000 litre bunding.

SL7 DG Vaults™ – are portable and delivered to site ‘business ready’ by conventional transportation eg, swing lift/scully, as they meet the required ISO standards for lifting/relocation.

SL7 DG Vaults™ – are deemed relocatable by most councils and therefore do not require a Resource Consent or Building Consent which can save considerable time and expense.

SL7 DG Vaults™ – products meet AS 1530.4 under the building code and AS 1940 as specified.

SL7 DG Vaults™ – by gross mass are on average 40% lighter than an equivalent concrete structure and come complete. A concrete alternative requires foundation engineering, construction expense, consenting expense and any associated structural engineering fees.

SL7 DG Vaults™ – products portability makes them easily relocatable to new premises or even on sold whereas concrete vaults are a ‘sunk cost’ to a business.

SL7 DG Vaults™ – portability automatically makes them an equitable asset on a company’s asset register.

SL7 DG Vaults™ – come with all walls epoxy painted.

SL7 DG Vaults™ – come with a compliance certification plate attached detailing all relevant information.

SL7 DG Vault™ Products

DG3M High Cube Vault:

The DG3M High Cube Vault features all of the benefits of our SL7 Vaults™ and comes standard with the following specifications;

SL7™ – Dimensions 2.99L x 2.44W x 2.69H
SL7™ – Doors at one end
SL7™ – Doors have integral barrier protection
SL7™ – Fibreglass grated flooring
SL7™ – 2,500 litre integral secondary containment – ‘bunding’.

DG6M High Cube Vault:

The DG6M High Cube Vault features all of the benefits of our SL7 Vaults™ and comes standard with the following specifications;

SL7™ – Dimensions 6.0L x 2.44W x 2.69H
SL7™ – Doors at one end or down one side
SL7™ – Doors have integral barrier protection
SL7™ – Fibreglass grated flooring
SL7™ – 5,000 litre integral secondary containment – ‘bunding’.

 

SL7™ Product Showcase

“Relocatable, Zero Separation & 4hr Fire Protection”